Get in touch with Talite Transformer Co., Ltd Company
Company & factory
Thirty years in one industry, in one place
Toplit began as Jiangsu Fangteng Industrial Co., Ltd. and has stayed in power equipment ever since. The plant sits in the Hai’an Economic and Technological Development Zone in Nantong, Jiangsu, and runs R&D, production and sales under one roof — so when a buyer asks for a non-standard ratio or a change of winding material, the engineer who answers works in the same building as the line that will wind it.
More than thirty transformer engineers carry each product from the first drawing review through to the final routine test. That is what keeps short-run and non-standard work routine here rather than exceptional, and why the catalogue runs to 22 series and over 600 specifications kept in production.
Founded as
Jiangsu Fangteng Industrial Co., Ltd.
Company type
High-tech enterprise — R&D, production and sales
Total assets
250M RMB
Registered capital
10M RMB
Workforce
200–300 staff, including 30+ engineers
Manufacturing site
25,000m²
Annual capacity
50,000MVA
Machines
260
Product series
22
Specifications
600+
Countries supplied
30+
What we build
From 35 kV distribution units to 500 kV UHV transformers
Three groups, one plant. Most enquiries that reach us combine at least two of them, which is usually why the enquiry reaches us in the first place.
High voltage
Power transformers
- 110 kV power transformers
- 220 kV power transformers
- 500 kV ultra-high voltage transformers
- Main transformers for generation and substation duty
35 kV and below
Distribution and special purpose
- Dry-type and oil-immersed transformers
- Amorphous alloy transformers
- Wind and solar energy storage transformers
- Prefabricated substations and reactors
- Furnace, rectifier and mining transformers
- Phase-separating and phase-shifting transformers
- Single phase and distribution transformers
Supporting
Switchgear and materials
- High and low voltage switchgear series
- High-voltage cable distribution boxes
- Electromagnetic wire for transformers
- Grain-oriented silicon steel sheet
Already running in
Exported to
Toplit is also a certified qualified supplier to several listed electrical equipment manufacturers — a status that is audited, not self-declared.
Service
From the first drawing to the tenth year on site
01
Specification review
Send drawings and technical specifications with your enquiry. Our engineers confirm feasibility and flag standard conflicts before a price is quoted.
02
One-to-one design
Non-standard ratios and kVA, multi-output windings, enclosure material and colour, OEM and ODM marking, cable length and plug type — NEMA, Schuko, BS or SAA.
03
Engineering support
Our electrical engineers stay available for the life of the project, not only until the purchase order is signed.
04
Installation and commissioning
We can send engineers to your site to install the equipment and hand over to your operations team in person.
05
Maintenance and spares
An in-house maintenance team plus a partner service network, so faults get resolved rather than escalated.
Talk to an engineer
Drawings, a single-line diagram, or a photograph of the rating plate on the unit you are replacing is enough to start.
Jiangsu Toplit Electric Co., Ltd.
Contact
Mei Delong — Marketing Manager
sales@toplit-transformer.com
+86 182 6188 3858
Address
Beihai Road, Chengdong Town, Hai’an, Nantong, Jiangsu, China 226600
Certification & quality
Tell us the destination, and we will tell you the paperwork
Certification is the first question almost every overseas buyer asks, and the honest answer changes with the port of entry. Toplit designs and produces to UL, cULus, CE, EU, IEC and RoHS requirements — here is what that means market by market.
ISO 9001
ISO 14001
ISO 45001
ISO 19011
OHSAS 18001:2007
CCC (3C)
Target Markets
- North America
- Europe
- Southeast Asia
- Middle East & Africa
- Australia & NZ
United States and Canada
Certification, energy efficiency and noise carry the most weight here, with a clear preference for dry-type units over oil-immersed. Demand is strongest for small industrial control transformers and for medical and photovoltaic storage duty.
- No-load and load loss figures quoted against US DOE efficiency requirements
- Copper windings supplied as standard for industrial and high-end equipment duty
- 60 Hz builds confirmed in writing before production release
UL
cULus
CSA
RoHS
ISO 9001
Test
Full factory acceptance testing on every order, witnessed at the plant if you want to attend.
Test
Type tests run against the destination-market standard, with results in the technical file.
Verify
Third-party inspection by the body you nominate — treated as normal, not as an obstacle.
Documents
Packing list, commercial invoice, Certificate of Origin and clearance certificates ship with the unit.
![Pad-Mounted Transformer: How It Works [2026 Guide]](https://toplit-transformer.com/wp-content/uploads/2026/08/pad-mounted-transformer-guide-featured-150x150.png)
![Single Phase Pad Mounted Transformer Guide [2026]](https://toplit-transformer.com/wp-content/uploads/2026/08/single-phase-pad-mounted-transformer-guide-featured-1-150x150.png)
